NIGHT LIGHTS

Wow, I see my last post was in September! You would think I've been a busy girl. Yes and No. September was around the time I had cataract surgery on my right eye. After a few weeks, I had the other eye done. Then I had to wait for new glasses. Before I got the new glasses, I participated in two craft shows. Writing those tiny labels was the hardest thing. But all is well again .... my vision has really improved.

My friend Drewcilla is an exceptional glass artist. She has been making custom night lights for years, selling them in her Etsy shop. Recently she started using fusible decal paper by Bullseye. She used a black and white printer to transfer the images to the decal paper. The images were then fired on glass, and they fired to a lovely sepia tone. How simple could that be, I thought. I have a black and white printer that I've used many times for etching images on metal, so I was pretty confident it would work. You can imagine my disappointment when I opened the kiln door and saw pieces of glass with NO IMAGES on them! I tried it a second time with the same result. So it was time to buy a new printer!

After wasting many sheets of the decal paper and getting some technical assistance from Canon, I finally managed to get three successful pieces printed and fired.

These are my dogs Sarah and Sammy. Sarah, on the left, is a poodle mix and is 14 years old. Sammy is a rescue dog I've had for a few months. He's two years old, is wild and crazy, and has brought so much fun and joy to his new home. He and Sarah play constantly.

This is Sarah again. She is beautiful.

This is Charlie, who we lost earlier this year. Such a sweetheart.

This was a great project! If you are interested in making night lights, I'd be happy to share my information with you.

ACRYLIC ENAMEL COPPER FLOWER EARRINGS!!

Looking through the many classes and videos I've purchased, I saw one on Craftsy I wanted to try ... "Torch-Fired Enameling: Luscious Color & Design" by Barbara Lewis. I ordered the acrylic enamels in a set of 9 and the decals used in the video. I loved the flower Barbara made ... but I think she used an enlarged version of the decal for the video. I'll ask her if I can order a larger set.

The first thing I did was copy the sheet of decals and then cut and glued the flowers onto my copper sheet. In the video she used double-sided tape and adhered the decal directly to the copper to saw out the form. Here's a photo of part of the sheet of decals and my cut copper pieces.

Then I torch fired several coats of white enamel to each copper flower. The next step was to add each flower decal to water until it started to slide off the sheet and then try get it safely onto the copper flower. It got easier. I found if the decal folded, I could slip it back into the water and miraculously it opened up ... so I could try again. Each finished piece was then blotted with paper towels and left to dry.

Later that day I fired on the decals with my torch until I thought they were done. For some reason I didn't take a photo, but I liked the effect with the sepia tone on the white background. Then I painted each flower with the acrylic enamels, trying to follow her example. Ha. They were left to dry overnight.

This morning, I torch fired each piece and they aren't bad! They don't look like Barbara's, but I like them. The last step was to add a transparent enamel which gave the pieces a glossy coat. They did improve, but they don't show the lines of the decals. So my enamel was too heavy (not "painterly") or I overfired. Next time. I lost one copper piece back when I fired on the white enamel, so I have three pairs of earrings. What do you think?

EMBOSSED COPPER NAPKIN RINGS

I've made several sets of napkin rings over the years, and this week sold my last pair through Etsy. Usually I have saved notes for various projects, but had none for these. What gauge copper to use? Do I anneal the metal first? Fortunately, I have a file drawer full of scrap copper gathered through the years from our local supplier, Industrial Metals. Bins of small sheets of various gauges that you can buy by the pound.

I have this very old Vintaj Big Kick machine to use for this project.

The metal piece is placed into an embossing folder and fed through the rollers on the platforms provided with the machine. It's a craftsy-type rolling mill that is usually used for paper and scrapbooking projects. But works well with thinner gauges of metal.

Here's the embossed metal piece. Looks great!!

After rolling out four pieces, I trimmed the corners, sanded the edges, and shaped them around a mandrel using a rawhide hammer. This work hardened the metal.

I'll make a few more sets with different patterns and then decide whether to patina them with liver of sulfur or leave them this beautiful copper finish. I'll then treat them with a gloss or satin spray to protect the surface.

MANDALA EARRINGS

I recently took an online class with Leslie Kail Villarreal. She is a very good instructor and provides supply lists and videos of each project from start to finish. Her website also has a lot of free videos on various jewelry projects.

This class was "Mandala Earrings". The earrings were fabricated from sterling silver sheet. She provided a template of the earrings. It was glued to the silver sheet and a jeweler's saw was used to cut out the pattern. Sounds so simple, doesn't it? It was easier than my last post on Lotus Flower Earrings, because the areas to saw were much larger. I've made three pairs so far and am happy to announce I sold one!!!!

The first pair I made is the one on the left, below. It measures 2-1/2". The smaller pair is 2-1/8". In the class, Leslie soldered a silver ball on each earring tip. The pair I sold was finished that way. I like the earrings either way, probably better without the balls.

LOTUS FLOWER EARRINGS

A pair of my newest earrings ... Lotus Flowers. These were fun and challenging to make. A pattern of the lotus flower was glued to sterling silver sheet. A hole was drilled in each section I wanted to remove in order to insert the jeweler's saw blade and carefully saw out that section. Then came lots and lots of filing and sanding. Jump rings were soldered on for the ear wires and for the dangling pearls. I really like these earrings. I know my sawing skills improved making these .... and in making the mandala earrings I'll post in a day or two.

NEW EARRINGS!

It's been a long, long, long time since my last post. No excuses, just a creative slump. I'm sure it happens to everyone. Anyway, since our Southern California weather has been SOOO HOT lately, I've been staying inside and keeping cool. And I've made several pairs of earrings. Here are the three I had time to photograph today and add to my Etsy shop. I love the textures that were achieved using the rolling mill and the richness of the patina. The ear wires are antique copper niobium, which is an alloy that is non-allergic. More to show you in a day or two. I forgot how long it took to photograph, edit and post to Etsy!

TRAIL'S END ... ANOTHER NEW BRACELET!!

It was a busy weekend ... another new bracelet that I really love. It looks great with any of my leather wrap-arounds, like the one shown. This bracelet is another project from Beadshop.com, called Trail's End. You'll find a list of supplies, a video and Episode Notes. How easy does it get!! Hopefully you'll make one and share your project.

WIRE COILED CHAIN AND LAMPWORK BRACELET

It's been so long ... months and months ... since I've posted here. I've been a little under the weather, but finally am feeling better and getting back to the projects I love.

I just finished a bracelet that was inspired by Kate Richbourg from Beadshop.com. She makes wire work look so easy! If you haven't visited that site, there are tons of projects you'll find under their Projects heading or under Free Tip Friday (10:30 a.m. PST) or Facebook Live (Wednesdays at 10:30 PST). You can watch the broadcasts live on Facebook or later see the videos. It really pays to sign up for their newsletter for great sales.

Back to the project ... I first wound a coil with 18 gauge wire on a 4mm mandrel until I had 2 inches. Later I had to make more links to get the bracelet to fit. Plus I had a few links you'll never see! This bracelet rolls on. You could also add a clasp if you prefer.

These coils were then cut and the ends were bent up at a 90-degree angle with flat nose pliers. My first try at this ... not that easy, but not too bad. It would be much easier to use dead soft wire which neither the 18 nor 20 gauge were.

Here are some of the finished coils:

Next, I selected some of my own lampwork beads and made loops on each side of the bead with 20 gauge wire. These loops were then attached to the coiled links. Here is the finished bracelet.